Surfaces people ask about most

Driveways, walkways and steps in paving stone or concrete are the most common requests, followed by decks, retaining walls and pool surrounds. Winter salt deposits, moss in the joints and oil or leaf stains are typical reasons to book.

  • Interlocking pavers, slabs and natural stone
  • Concrete driveways, sidewalks, steps and garage pads
  • Wood or composite decks and stairs
  • Low walls, borders and fences
  • Sturdy outdoor furniture, depending on the material

More pressure isn’t always better

Too much pressure can wash out polymeric sand joints, gouge wood, damage composite or strip a finish. Depending on the surface, the professional may use lower pressure, a surface cleaner, a suitable cleaning product or simple scrubbing.

Re-sanding the joints or applying a sealer after cleaning are separate steps. If you’re interested, say so: they aren’t included by default.

Describing your project

Give an approximate size (single or double driveway, a deck of roughly 13 × 16 feet), the material if you know it and the stains that bother you. Mention whether there is an outdoor tap: it’s an important practical detail.

One or two photos taken at eye level show the general condition well. If you don’t know the material or the size, just answer “I don’t know.”

Precautions to plan for

Spray can reach windows, garage doors, outdoor outlets and garden beds. Point out fragile items nearby and move vehicles and furniture off the surface before the visit. Some municipalities restrict water use in summer; check with your municipality whether a restriction applies.

From your request to a professional

Your request is reviewed, then presented anonymously to selected professionals. Your contact details are shared only with your permission. Method, price and date are agreed directly with the professional, based on their availability in your area.

Frequently asked questions

Will pressure washing damage my pavers?

Poorly adjusted pressure can dislodge joint sand or mark the surface. That’s why the method is chosen based on the material and its condition. If your joints are already washed out, mention it in your request.

Can a wood deck be pressure washed?

Sometimes, but wood is sensitive and too much pressure raises the grain. The professional may prefer low pressure, a suitable cleaner or scrubbing. Mention the type of wood and any stain if you know them.

Will oil stains come out completely?

Not always. An old stain has often soaked into the concrete or pavers. The professional can tell you what is realistic once they see the surface.

When is the best time?

After the snow melts, to remove winter salt and sand, then in late summer or fall before the frost. Avoid days when an overnight freeze is forecast.